{
	"align_infill_direction_to_model": "1",
	"bottom_shell_layers": "6",
	"brim_type": "no_brim",
	"brim_width": "10",
	"enable_support": "1",
	"extra_perimeters_on_overhangs": "1",
	"filename_format": "{if plate_name!=\"\"}{plate_name}{else}{input_filename_base}{endif}_{filament_type[initial_tool]}-{nozzle_temperature[0]}_{nozzle_diameter[0]}mm_{print_time}.gcode",
	"flush_into_infill": "1",
	"from": "User",
	"hole_to_polyhole": "1",
	"hole_to_polyhole_twisted": "0",
	"inherits": "0.16mm Optimal @Qidi XPlus4",
	"ironing_pattern": "concentric",
	"layer_height": "0.12",
	"name": "0.12mm Fine @Qidi XPlus4 Strength",
	"overhang_reverse": "1",
	"prime_tower_width": "10",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"print_settings_id": "0.12mm Fine @Qidi XPlus4 Strength",
	"reduce_crossing_wall": "1",
	"seam_slope_type": "all",
	"skirt_loops": "0",
	"small_perimeter_speed": "0",
	"small_perimeter_threshold": "10",
	"sparse_infill_pattern": "gyroid",
	"support_base_pattern": "hollow",
	"support_interface_speed": "50",
	"support_remove_small_overhang": "0",
	"support_speed": "100",
	"support_style": "default",
	"support_type": "tree(auto)",
	"top_surface_pattern": "monotonic",
	"version": "2.2.0.4",
	"wall_loops": "4",
	"wipe_before_external_loop": "1",
	"wipe_on_loops": "1",
	"xy_contour_compensation": "0.05",
	"xy_hole_compensation": "0.05"
}