{
    "align_infill_direction_to_model": "1",
    "brim_type": "no_brim",
    "detect_thin_wall": "1",
    "enable_support": "1",
    "extra_perimeters_on_overhangs": "1",
    "filename_format": "{if plate_name!=\"\"}{plate_name}{else}{input_filename_base}{endif}_{filament_type[initial_tool]}-{nozzle_temperature[0]}_{nozzle_diameter[0]}mm_{print_time}.gcode",
    "from": "User",
    "inherits": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
    "initial_layer_print_height": "0.2",
    "name": "0.10mm Standard @Qidi XPlus4 0.2 nozzle - Strength",
    "overhang_reverse": "1",
    "precise_z_height": "1",
    "print_extruder_id": [
        "1"
    ],
    "print_extruder_variant": [
        "Direct Drive Standard"
    ],
    "print_settings_id": "0.10mm Standard @Qidi XPlus4 0.2 nozzle - Strength",
    "reduce_crossing_wall": "1",
    "seam_slope_type": "all",
    "sparse_infill_pattern": "gyroid",
    "support_base_pattern": "hollow",
    "support_interface_bottom_layers": "-1",
    "support_interface_top_layers": "3",
    "support_remove_small_overhang": "0",
    "version": "2.3.2.60",
    "wipe_before_external_loop": "1",
    "wipe_on_loops": "1"
}