{
	"align_infill_direction_to_model": "1",
	"brim_type": "no_brim",
	"detect_thin_wall": "1",
	"enable_support": "1",
	"extra_perimeters_on_overhangs": "1",
	"filename_format": "{if plate_name!=\"\"}{plate_name}{else}{input_filename_base}{endif}_{filament_type[initial_tool]}-{nozzle_temperature[0]}_{nozzle_diameter[0]}mm_{print_time}.gcode",
	"from": "User",
	"inherits": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
	"initial_layer_print_height": "0.2",
	"name": "0.10mm Standard @Qidi XPlus4 0.2 nozzle - Strength",
	"overhang_reverse": "1",
	"precise_z_height": "1",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"print_settings_id": "0.10mm Standard @Qidi XPlus4 0.2 nozzle - Strength",
	"reduce_crossing_wall": "1",
	"seam_slope_type": "all",
	"sparse_infill_pattern": "gyroid",
	"support_base_pattern": "hollow",
	"support_interface_bottom_layers": "-1",
	"support_interface_top_layers": "3",
	"support_remove_small_overhang": "0",
	"version": "2.3.2.60",
	"wipe_before_external_loop": "1",
	"wipe_on_loops": "1"
}