{
	"type": "machine",
	"name": "fdm_rrf_common",
	"inherits": "fdm_machine_common",
	"from": "system",
	"instantiation": "false",
	"gcode_flavor": "reprapfirmware",
	"machine_max_acceleration_e": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_extruding": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_travel": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_x": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_y": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_z": [
		"500",
		"200"
	],
	"machine_max_speed_e": [
		"25",
		"25"
	],
	"machine_max_speed_x": [
		"500",
		"200"
	],
	"machine_max_speed_y": [
		"500",
		"200"
	],
	"machine_max_speed_z": [
		"12",
		"12"
	],
	"machine_max_jerk_e": [
		"2.5",
		"2.5"
	],
	"machine_max_jerk_x": [
		"9",
		"9"
	],
	"machine_max_jerk_y": [
		"9",
		"9"
	],
	"machine_max_jerk_z": [
		"0.2",
		"0.4"
	],
	"machine_min_extruding_rate": [
		"0",
		"0"
	],
	"machine_min_travel_rate": [
		"0",
		"0"
	],
	"max_layer_height": [
		"0.32"
	],
	"min_layer_height": [
		"0.08"
	],
	"printable_height": "250",
	"extruder_clearance_radius": "65",
	"extruder_clearance_height_to_rod": "36",
	"extruder_clearance_height_to_lid": "140",
	"printer_settings_id": "",
	"printer_technology": "FFF",
	"printer_variant": "0.4",
	"retraction_minimum_travel": [
		"1"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retract_when_changing_layer": [
		"1"
	],
	"retraction_length": [
		"0.8"
	],
	"retract_length_toolchange": [
		"2"
	],
	"z_hop": [
		"0.4"
	],
	"retract_restart_extra": [
		"0"
	],
	"retract_restart_extra_toolchange": [
		"0"
	],
	"retraction_speed": [
		"30"
	],
	"deretraction_speed": [
		"30"
	],
	"z_hop_types": "Normal Lift",
	"silent_mode": "0",
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "",
	"wipe": [
		"1"
	],
	"default_filament_profile": [
		"Generic PLA @System"
	],
	"default_print_profile": "0.20mm Standard @MyRRF",
	"bed_exclude_area": [
		"0x0"
	],
	"scan_first_layer": "0",
	"nozzle_type": "undefine",
	"auxiliary_fan": "0",
	"machine_start_gcode": "; Prime Filament Sensor for Runout\nM581 P1 T2 S-1 R0\nM950 J1 C\"nil\" ; Input 1 e0 Filament Sensor \nM591 D0 P2 C\"e0stop\" S1 ; Filament Runout Sensor\n\nM83  ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S140 ; Set extruder temp 140C before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n;G28 W\nG32 ; Levels Z Tilt and probes Z=0\nG29 S0 ; mesh bed leveling\nG1 X0 Y0 Z2 F2000\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 X10 Y-7 Z0.3 F1000.0 ; go outside print area\nG92 E0.0\nG1 Z0.2 E8 ; Purge Bubble\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0",
	"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
	"machine_pause_gcode": "M601"
}