{
	"whitelist": [],
	"blacklist": [
		{
			"type": "TPU",
			"action": "prohibition",
			"slot": "ams",
			"description": "TPU is not supported by AMS."
		},
		{
			"vendor": "Bambu Lab",
			"type": "PET-CF",
			"action": "prohibition",
			"slot": "ams",
			"description": "AMS does not support 'Bambu Lab PET-CF'."
		},
		{
			"type": "TPU",
			"action": "warning",
			"model_id": [
				"N6"
			],
			"description": "How to feed TPU filament on X2D.",
			"wiki": "https://e.bambulab.com/t?c=PAxXqQu2zBgvN3ea"
		},
		{
			"type": "TPU-AMS",
			"action": "warning",
			"model_id": [
				"N6"
			],
			"description": "How to feed TPU filament on X2D.",
			"wiki": "https://e.bambulab.com/t?c=PAxXqQu2zBgvN3ea"
		},
		{
			"type": "TPU",
			"action": "warning",
			"description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
		},
		{
			"type": "TPU-AMS",
			"action": "warning",
			"description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
		},
		{
			"type": "PVA",
			"action": "warning",
			"slot": "ams",
			"description": "Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use."
		},
		{
			"type": "PVA",
			"action": "warning",
			"slot": "ext",
			"description": "Damp PVA is flexible and may get stuck in extruder. Dry it before use."
		},
		{
			"type": "PPS-CF",
			"model_id": [
				"O1S"
			],
			"action": "warning",
			"description": "PPS-CF is brittle and could break in bended PTFE tube above Toolhead.",
			"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
		},
		{
			"type": "PPA-CF",
			"model_id": [
				"O1S"
			],
			"action": "warning",
			"description": "PPA-CF is brittle and could break in bended PTFE tube above Toolhead.",
			"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
		},
		{
			"type_suffix": "CF",
			"action": "warning",
			"slot": "ams",
			"description": "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution."
		},
		{
			"type_suffix": "GF",
			"action": "warning",
			"slot": "ams",
			"description": "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution."
		},
		{
			"vendor": "Bambu Lab",
			"type": "PLA",
			"name": "PLA Glow",
			"model_id": [
				"N1",
				"N2S"
			],
			"action": "warning",
			"slot": "ams",
			"description": "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite."
		},
		{
			"types": ["TPU"],
			"action": "warning",
			"model_id": ["O1C2"],
			"description": "How to feed TPU filament.",
			"wiki": "https://e.bambulab.com/t?c=Db9YyP5qg3MHbSHD"
		},
		{
			"type_suffix": "CF",
			"nozzle_flows": ["High Flow"],
			"nozzle_diameters": [0.4],
			"model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7"],
			"action": "warning",
			"slot": "ext",
			"description": "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
		},
		{
			"name_suffix": "PA6-GF",
			"nozzle_flows": ["High Flow"],
			"nozzle_diameters": [0.4],
			"model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6"],
			"action": "warning",
			"slot": "ext",
			"description": "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
		},
		{
			"type_suffix": "CF",
			"nozzle_flows": ["High Flow"],
			"nozzle_diameters": [0.4],
			"model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6"],
			"action": "warning",
			"slot": "ams",
			"description": "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
		},
		{
			"name_suffix": "PA6-GF",
			"nozzle_flows": ["High Flow"],
			"nozzle_diameters": [0.4],
			"model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6"],
			"action": "warning",
			"slot": "ams",
			"description": "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution."
		},
		{
			"name_suffix": "TPU 85A",
			"nozzle_flows": ["High Flow"],
			"nozzle_diameters": [0.4, 0.6, 0.8],
			"model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6"],
			"action": "warning",
			"slot": "ext",
			"description": "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution."
		},
		{
			"name_suffix": "TPU 90A",
			"nozzle_flows": ["High Flow"],
			"nozzle_diameters": [0.4, 0.6, 0.8],
			"model_id": ["O1D", "O1S", "O1E", "O1C", "O1C2", "N7", "N6"],
			"action": "warning",
			"slot": "ext",
			"description": "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution."
		},
		{
			"name_suffix": "PA6-GF",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "prohibition",
			"description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
		},
		{
			"type": "PPS-CF",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "prohibition",
			"description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
		},
		{
			"type": "PLA-Aero",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "prohibition",
			"description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
		},
		{
			"type": "ASA-Aero",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "prohibition",
			"description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
		},
		{
			"name_suffix": "TPU 85A",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "prohibition",
			"description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
		},
		{
			"name_suffix": "TPU 90A",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "prohibition",
			"description": "The current filament doesn't support the E3D high-flow nozzle and can't be used."
		},
		{
			"white_fila_ids": ["GFU04", "GFU03", "GFU01", "GFU00", "GFU99"],
			"nozzle_flows": ["TPU High Flow"],
			"model_id": ["O1D", "O1E"],
			"action": "prohibition",
			"description": "The current filament doesn't support the TPU high-flow nozzle and can't be used."
		},
		{
			"type": "TPU",
			"action": "prohibition",
			"calib_mode": "auto_pa",
			"model_id": ["O1D", "O1E"],
			"description": "Auto dynamic flow calibration is not supported for TPU filament."
		},
		{
			"name_suffix": "Bambu TPU 85A",
			"nozzle_flows": ["Standard", "High Flow"],
			"nozzle_diameters": [0.4],
			"model_id": ["O1D", "O1E"],
			"action": "prohibition",
			"description": "Bambu TPU 85A is not supported for printing with 0.4 mm Standard or High Flow nozzles."
		},
		{
			"types": ["TPU", "TPU-AMS"],
			"action": "warning",
			"model_id": ["N7"],
			"description": "How to feed TPU filament.",
			"wiki": "https://e.bambulab.com/t?c=blx2TDu3uoRdfyIx"
		},
		{
			"types": ["TPU"],
			"action": "warning",
			"model_id": ["O1D"],
			"description": "How to feed TPU filament.",
			"wiki": "https://e.bambulab.com/t?c=fwWqpBg37Liel92N"
		},
		{
			"types": ["TPU"],
			"action": "warning",
			"model_id": ["O1E"],
			"description": "How to feed TPU filament.",
			"wiki": "https://e.bambulab.com/t?c=fwWqpBg37Liel92N"
		},
		{
			"types": ["TPU"],
			"action": "warning",
			"model_id": ["O1S"],
			"description": "How to feed TPU filament.",
			"wiki": "https://e.bambulab.com/t?c=L45sIEpzy1Wz0tsV"
		},
		{
			"type": "PLA",
			"name_suffix": "PLA Silk",
			"action": "warning",
			"slot": "ams",
			"has_filament_switch": true,
			"description": "%s may fail to load or unload due to the Filament Track Switch. If you wish to continue.",
			"wiki": "https://e.bambulab.com/t?c=s0CgMOrctZiPablB"
		},
		{
			"name_suffix": "PC FR",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "warning",
			"description": "Default settings may affect print quality. Adjust as needed for best results.",
			"wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
		},
		{
			"name_suffix": "PLA Silk",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "warning",
			"description": "Default settings may affect print quality. Adjust as needed for best results.",
			"wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
		},
		{
			"name_suffix": "Support For PA/PET",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "warning",
			"description": "Default settings may affect print quality. Adjust as needed for best results.",
			"wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
		},
		{
			"name_suffix": "PVA",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "warning",
			"description": "Default settings may affect print quality. Adjust as needed for best results.",
			"wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
		},
		{
			"name_suffix": "Support For PLA",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "warning",
			"description": "Default settings may affect print quality. Adjust as needed for best results.",
			"wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
		},
		{
			"name_suffix": "Support For PLA/PETG",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "warning",
			"description": "Default settings may affect print quality. Adjust as needed for best results.",
			"wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
		},
		{
			"name_suffix": "Support for ABS",
			"nozzle_flows": ["High Flow"],
			"model_id": ["C11", "C12", "BL-P001"],
			"action": "warning",
			"description": "Default settings may affect print quality. Adjust as needed for best results.",
			"wiki": "https://wiki.bambulab.com/en/accessories/e3d-hotend"
		}
	]
}